MUC-OFF NO PUNCTURE HASSLEE TUBELESS TIRE SEALANT KIT

Needs a super lightweight but badass tubeless sealant? Boom, you've just found it. Muc-Off No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfibre molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. This formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.

Developed with the world's top downhillers and pro peloton teams, to give you the finest tyre sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tyres, No Puncture Hassle works from 15 psi - 120 psi and temperatures from -20°C to +50°C. The pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go.

140 ml Kit includes: 15 ml measuring scoop, UV light, and valve core remover which can be stored on valve using included 2 o-rings.

• For Downhill/Enduro/Road
• Seals tears and holes up to 6mm
• Seals porous tyres and bead/rim gaps
• Lasts up to 6+ months in temperate climates* and won't ball up
• Contains cutting-edge microfibre molecules to fill large holes and tears
• Includes unique UV detection system that highlights any punctures
• Non-corrosive and easy to wash off with water
• Ammonia free
• CO2 Compatible

Minimum amount per tyre: (add up to 30ml extra for increased protection)
• Road: 30-45ml (2 to 3 scoops)
• 26" MTB & 27.5": 60-75ml (4 to 5 scoops)
• Cross 700c: 60-75ml (4 to 5 scoops)
• 29" MTB: 105ml-140ml (7 or the whole pouch)
• Downhill: 120-140ml (8 or the whole pouch)

Directions for Use:
• Step 1 - Shake pouch vigorously before use.
• Step 2 - Put your bike in a work stand if possible.
• Step 3 - Remove the core of your Presta valve with the tool provided (if you have non-removable valve cores, simply pour or use the scoop to apply directly into your unseated tyre and remount).
• Step 4 - With the valve at the 12 o’clock position, and using the non-drive side of the bike, push the pouch over the valve and rotate the valve to the 6 o’clock position.
• Step 5 - Squeeze in the desired amount and fold the pouch to the desired fill line, re-insert the valve core and inflate the tyre in accordance with your manufacturer’s recommendations.
• Step 6 - Repeatedly spin the wheel, shake it from side to side and hey presto, you’re now ready to rock ‘n’ roll! After use, the valve core removal tool can be added to your valve so it’s always there when you need it!
• Step 7 - Regularly check the amount in each tyre and simply top up as needed. Keep out of reach of children. Dispose of contents/ container in accordance with local regulations.
• NOTE - Avoid contact with eyes. Do not drink.